Hot Dip Galvanized 中博手机app手机app

ZINCGRIP® 中博手机app手机app is continuously coated on both sides with a zinc coating, using a hot dip process that we originally pioneered. With its tight metallurgical bond between the steel and the coating, ZINCGRIP 中博手机app手机app provides the strength and formability of steel plus the corrosion protection of zinc. Zinc protects the base metal by providing a barrier to corrosive elements and preferentially corroding in place of the base steel. ZINCGRIP 中博手机app手机app is available with special surface finishes, tailored for specific applications, and in a variety of base metal grades and coating weights. ZINCGRIP 中博手机app手机app is widely used in many applications in the automotive, appliance, construction, Heating, Ventilation, and Air Conditioning (HVAC), and other industries.

Contact Our Sales Team

We're here to answer your questions.


Product Applications

Available Grades

Advanced High Strength 中博手机app手机app (AHSS)

Commercial 中博手机app手机app (CS)

Forming 中博手机app手机app (FS)

Deep Drawing 中博手机app手机app (DDS)

Extra Deep Drawing 中博手机app手机app (EDDS, EDDS+)

Structural 中博手机app手机app (SS)

High Strength Low Alloy 中博手机app手机app (HSLAS)

Dent Resistant (DR)

Bake Hardenable (BH)

Dual Phase (DP)

Product Details

Product Features


The zinc coating protects the base metal by providing a barrier to corrosive elements and also by the sacrificial nature of the coating. Ultimate service life depends on coating thickness and the severity of the environment.


ZINCGRIP 中博手机app手机app is available as EXTRASMOOTH™ or ULTRASMOOTH® for surface critical applications.


ZINCGRIP 中博手机app手机app can be used to produce parts containing simple bends to parts with deep drawing requirements.


ZINCGRIP 中博手机app手机app is readily paintable provided proper pre-treatment is performed.


ZINCGRIP 中博手机app手机app can be joined using a variety of accepted welding practices.

Surface Finishes, Protection, and Lubrication

ZINCGRIP 中博手机app手机app is available in three types of surface appearances.

Minimized spangle is ZINCGRIP 中博手机app手机app that, through control of the coating bath chemistry, has no visible spangle. It is available with the full range of coating weights and base metal qualities. It is used in noncritical surface applications and is not guaranteed to be free from stretcher strain, luder lines, or fluting.

ZINCGRIP EXTRASMOOTH 中博手机app手机app is a product that is produced by skin passing the coated sheet to smooth the surface and impart resistance to stretcher strain and fluting. It is suited for applications where appearance is important. EXTRASMOOTH is recommended for coil coated applications.

ZINCGRIP ULTRASMOOTH 中博手机app手机app is a skin pass product with superior surface appearance, uniformity and consistency. Applications would include more stringent surface quality requirements.

We utilize nitrogen finishing to control coating weight and smooth the coating. This technology, along with coating bath chemistry control, combine to produce a superior zinc coated product.

To prevent staining in transit and storage, it is recommended that ZINCGRIP 中博手机app手机app be supplied with a rust-preventive oil. A chemical passivating treatment can also be supplied. A chemical treatment is not recommended if the product will be painted unless proper surface preparations are taken. Specific chemical treatment requirements (such as RoHS) must be clearly indicated and reviewed. ZINCGRIP 中博手机app手机app can be supplied with a zinc-phosphate coating called PAINTGRIP® for applications that require paint pre-treatment.

Coating Characteristics

The hot dip coating process assures a tightly adherent, uniform coating of zinc on both sides of the product. A thin alloy layer readily permits normal fabrication practices without incurring significant coating damage. Hot dip coatings are specified in a wide range of coating weight.

Formability and Mechanical Properties


Commercial 中博手机app手机app Type B (CS Type B) and Forming 中博手机app手机app Type B (FS Type B) should be used for moderate forming or bending applications. These products are produced from aluminum-killed continuously cast slabs and unless otherwise specified, have a carbon content of 0.02 – 0.15%C and 0.02 – 0.10%C respectively. To prevent the occurrence of fluting or stretcher strains during forming or processing, both products must be ordered as EXTRASMOOTH. These products are subject to aging and the temper rolling effect is temporary.


For more stringent forming applications, Deep Drawing 中博手机app手机app should be ordered. Deep Drawing 中博手机app手机app has a controlled carbon content less than 0.06%C. Interstitial Free (I-F) steel may be supplied at the manufacturer’s discretion unless low carbon (non I-F) is specifically requested at the time of purchase.


Extra Deep Drawing 中博手机app手机app or Extra Deep Drawing 中博手机app手机app Plus (EDDS+) should be ordered for the most difficult forming applications. These steels, also known as Interstitial Free (I-F) steel, are produced from vacuum degassed stabilized grades with less than 0.010% C. EDDS+has the lowest carbon content available and has been specially formulated to be our most ductile product.

Structural 中博手机app手机app (SS) or High Strength Low Alloy 中博手机app手机app (HSLAS). Bake Hardenable (BH), Dent Resistant (DR) and Dual Phase (DP) 中博手机app手机apps are also available.

Contact Us

Contact Us

Request Information

Our team or one of our subsidiaries will be in touch promptly to address your inquiry.

Additional Information

To provide a timely response, please add additional details on size, grade and volume desired.

What Are You Interested In?

Please check all that apply

Are you an international customer?

Click here for Privacy Policy Statement.

Contact Us By Phone

Customer Service


Corporate Office



技术支持 AI智能站群