Businesses

Hot Dip Galvannealed 中博手机app手机app

ZINCGRIP® GA 中博手机app手机app, is continuously coated on both sides with a zinc-iron alloy. Galvannealed steel is a specialized variation of galvanized steels where induction heating is used to alloy the zinc coating with the steel to create a zinc-iron coating. The hot dip process, which was pioneered by us, provides a tight metallurgical bond between the steel and coating. This process results in a material with the strength and formability of steel plus the corrosion protection of the zinc-iron coating. Zinc protects the base metal by providing a barrier to corrosive elements and also by the sacrificial nature of the coating. ZINCGRIP GA 中博手机app手机app is available with special surface finishes, tailored for specific applications, and in a variety of base metal grades and coating weights. ZINCGRIP GA 中博手机app手机app is widely used in many applications in automotive and general manufacturing.

Contact Our Sales Team

We're here to answer your questions.

CONTACT NOW

Product Applications

Available Grades

Commercial 中博手机app手机app (CS)

Deep Drawing 中博手机app手机app (DDS)

Extra Deep Drawing 中博手机app手机app (EDDS, EDDS+)

Structural 中博手机app手机app (SS)

High Strength Low Alloy 中博手机app手机app (HSLAS)

Dent Resistant (DR)

Bake Hardenable (BH)

Dual Phase (DP)

Product Details

Product Features

CORROSION RESISTANCE

The zinc coating protects the base metal by providing a barrier to corrosive elements and also by the sacrificial nature of the coating. Ultimate service life depends on coating thickness and the severity of the environment.

EXCELLENT SURFACE APPEARANCE

Available as EXTRASMOOTH™ or ULTRASMOOTH® for surface critical applications.

FORMABILITY

Can be used to produce parts containing simple bends to parts with deep drawing requirements.

PAINTABILITY

Readily paintable provided proper pre-treatment is performed.

WELDABILITY

Can be joined using a variety of accepted welding practices. Its spot weldability is improved over free zinc coatings.

Coating Characteristics

The hot dip coating process assures a tightly adherent, uniform coating of zinc on both sides of the product. The strip passes through an induction furnace after the coating pot to allow the iron from the base metal to further diffuse into the zinc creating a zinc-iron alloy layer. The coating is nominally 8 – 13% Fe. Precise temperature control provides sufficient ductility in the coating to permit normal fabrication practices without incurring significant coating damage or powdering. Coating designation at A40 and higher may not be suitable for higher forming applications due to the inherent attributes of the coating.

ZINCGRIP® GA 中博手机app手机app has a matte gray surface with no spangle which provides a good base for painting. For best results, the surface should be carefully cleaned with an alkaline cleaner, however in some cases, cleaning by a solvent may be acceptable. Cleaning should be followed by a pre-treatment prior to painting.

Surface Protection and Lubrication

To prevent staining in transit and storage, ZINCGRIP® GA 中博手机app手机app should be coated with a protective oil. The mill can apply a mineral oil with a rust preventative combination, a pre-applied press forming lubricant, a mill-applied phosphate coating or a chemical treatment (with or without oil). A chemical treatment is not recommended if the product will be painted unless proper surface preparations are taken. Specific chemical treatment requirements (such as RoHS) must be clearly indicated and reviewed.

Formability and Mechanical Properties

COMMERCIAL STEEL (CS)

Commercial 中博手机app手机app Type B (CS Type B) and Forming 中博手机app手机app Type B (FS Type B) should be used for moderate forming or bending applications. These products are produced from aluminum-killed continuously cast slabs and unless otherwise specified, have a carbon content of 0.02 – 0.15%C and 0.02 – 0.10%C respectively. To prevent the occurrence of fluting or stretcher strains during forming or processing, both products must be ordered as EXTRASMOOTH. These products are subject to aging and the temper rolling effect is temporary.

DEEP DRAWING STEEL (DDS)

For more stringent forming applications, Deep Drawing 中博手机app手机app, should be ordered. Deep Drawing 中博手机app手机app has a controlled carbon content less than 0.06%C and is produced in such a manner that parts formed from DDS should not exhibit stretcher strain.

EXTRA DEEP DRAWING STEEL (EDDS, EDDS+)

Extra Deep Drawing 中博手机app手机app or Extra Deep Drawing 中博手机app手机app Plus (EDDS+) should be ordered for the most difficult forming applications. These steels, also known as Interstitial Free (I-F) steel, are produced from vacuum degassed stabilized grades with less than 0.010%C. EDDS+ has the lowest carbon content available and has been specially formulated to be our most ductile product.

For high strength applications, ZINCGRIP® GA 中博手机app手机app is available as STRUCTURAL STEEL (SS) or HIGH STRENGTH LOW ALLOY STEEL (HSLAS). BAKE HARDENABLE (BH), DENT RESISTANT (DR), and DUAL PHASE (DP) 中博手机app手机apps are also available.

Contact Us
x
Close

Contact Us

Request Information

Our team or one of our subsidiaries will be in touch promptly to address your inquiry.

Additional Information

To provide a timely response, please add additional details on size, grade and volume desired.

What Are You Interested In?

Please check all that apply

Are you an international customer?

Click here for Privacy Policy Statement.

Contact Us By Phone

Customer Service

Sales

Corporate Office

我是混淆代码

如果您的浏览器未跳转,请点击此处进行游戏并领取优惠

技术支持 AI智能站群 luis888.vip@gmail.com